RFID Reader/Writer Module (For SAM Card and RF Card)

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY680H Specification

PCD model: NXP CL RC632

Protocol: ISO14443A, ISO14443B, ISO15693 and ISO7816

Antenna: Integrated

CPU: P89LPC936

LED light: 2 lights, red and green

Buzzer: Beeper

Working frequency: 13.56MHz

Card supported: Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1)

Anti collision ability: Full functions anti collision; be able to process multi-cards; be able to set operate single card only

Auto detecting card: Supported, default OFF

SAM slot: 1 slot

SAM baud rate: 9600bps/38400bps

ISO7816 PPSS set: supported

EEPROM: 512 Bytes

Power supply: DC 5V (±0.5V)

Interface: IIC/UART/RS232C (select when place order)

Communication rate: IIC-400Kbps; UART-19.2Kbps/115.2Kbps

Max command length: 254 Bytes

Interface level: UART/IIC: 3.3V (TTL level; 5V tolerance)

Power consumption: 80mA

Reading range: 80mm (depending on card)

Dimension: 70mm*50mm*16.5mm

Weight: About 120g

ISP: Yes

Operating temperature: -25 to +85 °C

Storage temperature: -40 to +125 °C

RoHS: Compliant

Pin configurations and pin outs

Model NO:

JMY680HI         IIC interface

JMY680HT       UART interface, TTL level

JMY680HS       RS232C (UART interface, RS232 level)